
Maintenance Object Repair Procedures
555-233-123
10-1288
Issue 4 May 2002
1150
1188
1189
1190
FAIL
The Packet Control circuit pack was not successfully
downloaded, and the Packet Control circuit pack currently
does not contain valid downloadable firmware. The error
codes have the following meanings:
1150- Generic tape error (not any of the following three errors)
1188- Internal system error
1189- Tape currently in use
1190- No tape cartridge in tape drive
1. Verify that there is a tape cartridge in the tape unit.
2. If the tape unit is in use (the yellow LED on the tape drive
is on and there is tape cartridge motion), wait until the first
request is complete. If there does not appear to be tape
motion and/or the yellow LED on the tape drive is not
on, then go to the next step.
3. Retry the command at 1-minute intervals a maximum of
three times.
4. Verify that the tape unit is not alarmed. Use the display
alarm command and refer to the TAPE Maintenance
documentation for recommended repair procedures to
retire the alarm, if one exists; otherwise go to the next
step.
5. If the test has failed consistently with the 1150 error code,
then escalate the problem. If the test has failed
consistently with the 1188 error code, replace the tape
cartridge and then retry the reset command. If the test
failed consistently with the 1189 error code, escalate the
problem. If the test failed consistently with the 1190 error
code, then replace both the tape cartridge and the tape
drive.
2064
FAIL
The downloaded firmware cannot be executed with this
hardware vintage of the Packet Control circuit pack.
1. Retry the command.
2. If it fails again with the same error code, replace the tape
cartridge and retry the reset command.
2065
FAIL
The tape does not contain valid Packet Control circuit pack
firmware.
1. Retry the command. If the same error code is returned,
replace the tape and then retry the command.
Table 10-482.
TEST #586 Packet Control Reset Test — Continued
Error
Code
Test
Result
Description/Recommendation
Continued on next page
Summary of Contents for Definity SI
