Avaya Definity SI, Maintenance Manual, Page: 1337 / 2968

DIG-BD (Digital Line Circuit Pack)
Issue 4 May 2002 10-551 555-233-123
DIG-BD (Digital Line Circuit Pack)
Refer to XXX-BD (Common Port Circuit Pack) Maintenance documentation for
circuit pack level errors. See also DIG-LINE (Digital Line) Maintenance
documentation for related line information.
DIG-IP-STN (Digital IP Station)
The Softphone has some level of existing DCP maintenance in the form of audits,
and updates. In addition, it also has error log entries and test to clear values.
In addition this MO covers a new Avaya Voice terminal that communicates to the
switch via an IP LAN. This type of terminal, referred to as an IP Phone is made up
of the 46XX line of terminals. This terminal emulates DCP signaling carried over
TCP.
This station type is not attached to a port board. Insertion of the station is not
driven by board insertion, rather it is driven by successful registration of the
endpoint. It is maintained via a set of explicit TCP/IP ping requests and errors
reported by the User Manger software, which terminates the H.323 signaling
portion of each endpoint. The MO follows standard maintenance methodology
and supports test, busyout, release and status commands.
Maintenance for Softphone includes Error Log Entries and Test to Clear Values.
See table DIG-IP-STN Digital IP Station Error Log Entries.
MO Name (in
Alarm Log)
Alarm
Level Initial Command to Run
1
1 Where P is the port network number (1 for PPN and 2 or 3 for EPN); C is the carrier
designation (for example, A, B, C, D, or E); and SS is the address of the slot in the
carrier where the circuit pack is located (for example, 01, 02, etc.).
Full Name of MO
DIG-BD MIN test board PCSS sh Digital Line Circuit Pack
DIG-BD WRN test board PCSS sh Digital Line Circuit Pack
MO Name (in
Alarm Log)
Alarm Level
Initial Command to
Run
Full Name of MO
DIG-IP-STN WARNING test station extension Digital IP Station