
WAE-PORT (Wideband Access Endpoint Port)
Issue 4 May 2002
10-1997
555-233-123
1003
ABORT
The system could not allocate a tone receiver for the test. The
system may be oversized for the number of Tone Detectors
present, or some Tone Detectors may be out-of-service. The
list measurement tone-receiver command displays
information on the system’s tone receivers.
1. Look for TTR-LEV errors in the Error Log. If errors are
present, refer to TTR-LEV Maintenance documentation.
2. Look for TONE-PT errors in the Error Log. If errors are
present, refer to TONE-PT Maintenance documentation.
3. If neither condition exists, retry the test at one minute
intervals a maximum of 5 times.
1004
ABORT
The port has been seized by a user for a valid call. Use the
status access-endpoint <extension> command to
determine when the port is available for testing. The port is
available when it is in the in-service/idle state.
1. Retry the command at one minute intervals a maximum of
5 times.
2. If the test continues to abort, and if the port is not in use,
escalate the problem.
1020
ABORT
The test did not run due either to a previously existing error on
the specific port or to a more general circuit pack error.
1. Examine the Error Log for existing errors against this port
or the circuit pack, and attempt to diagnose the already
existing error.
2000
ABORT
Response to the test request was not received within the
allowable time period.
2100
ABORT
System resources required for this test are not available.
1. Retry the command at one minute intervals a maximum of
5 times.
FAIL
The NPE of the tested port was found to be transmitting in
error. This causes noisy and unreliable connections.
1. Replace the circuit pack.
PASS
The port is correctly using its allocated time slots.
1. User-reported troubles on this port should be investigated
by using other port tests and by examining the terminal
adapter or the external wiring.
Table 10-717.
TEST #6 NPE Crosstalk Test — Continued
Error
Code
Test
Result
Description/Recommendation
Continued on next page
Summary of Contents for Definity SI
