Avaya Definity SI, Maintenance Manual, Page: 2115 / 2968

PMS-LINK (Property Management System Link)
Issue 4 May 2002 10-1329 555-233-123
System Technician-Demanded Tests: Descriptions
and Error Codes
Always investigate tests in the order presented in the table below when inspecting
errors in the system. By clearing error codes associated with the Link Retry Test,
for example, you may also clear errors generated from other tests in the testing
sequence.
Link Tear Down Test (#213)
This test is destructive.
This test disconnects the existing link between the system and the external PMS
device. If the link has been disconnected already, then this test just returns
“PASS.” All resources allocated for a PMS Link are released after this test.
Order of Investigation
Short Test
Sequence
Long Test
Sequence
D/ND
1
1 D = Destructive; ND = Nondestructive
Link Tear Down Test (#213) X D
Link Retry Test (#215) X X ND
Table 10-490. TEST #213 Link Tear Down Test
Error
Code Test
Result Description/Recommendation
40
50 ABORT Internal System Error.
1. Retry the command at one-minute intervals a maximum of 5
times.
1010 ABORT The PMS Link has been busied out and placed in the
out-of-service state.
1. Enter release pms-link command to release the PMS Link
from busyout state.
2. Retry test pms long command to execute the test.
FAIL Internal System Error.
1. Retry the command at one-minute intervals a maximum of 5
times.
PASS The PMS Link is torn down.
Continued on next page