Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 932 / 1930

Maintenance Objects
555-233-119
932
Issue 5 October 2002
1003 ABORT The system could not allocate a tone receiver for the test. The system may
be oversized force.
1. Look for TTR-LEV errors in the Error Log. If present, refer to TTR-LEV
Maintenance documentation.
2. Look for TONE-PT errors in the Error Log. If present, refer to TONE-PT
Maintenance documentation.
3. If neither condition exists, retry the command at 1-minute intervals a
maximum of 5 times.
1004 ABORT System resources required to run this test are not available. The port may
be busy with a valid call. Use display port PCSSpp to determine the trunk
group/member number of the port. Use status trunk to determine the
service state of the port. If the service state indicates that the port is in use,
the port is unavailable for certain tests. Wait until the port is idle before
retesting.
1. If the port status is idle, retry the command at 1-minute intervals for a
maximum of 5 times.
1018 ABORT The test was disabled via administration. Verify that the Maintenance
Test field on the Trunk Group screen is set to n. To enable the test, issue
change trunk-group x where x equals the number of the trunk group to be
tested. Set the ’Maintenance Test’ field y.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2000 ABORT Response to the test was not received within the allowable time period.
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Table 164. TEST #33 Loop Around and Conference Circuit Test — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page