Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 702 / 1930

Maintenance Objects
555-233-119
702
Issue 5 October 2002
n. Error type 3999

Indicates that the circuit pack sent a large number of
control channel messages to the switch within a short period of time. If
error type 1538 is also present, the circuit pack was taken out-of-service
due to hyperactivity. If error type 1538 is not present, the circuit pack has
not been taken out-of-service, but it has generated 50% of the messages
necessary to be considered hyperactive. This may be completely normal
during heavy traffic periods. However, if this error type is logged when the
circuit pack is being lightly used, it may indicate a problem with the circuit
pack or the equipment attached to it.
o. Error Type 2

Check the Class of Restriction (COR) administered for the
Data Line extension assigned to the TN750 for uploading and downloading
announcements. The extension can be found by using list data-module.
System Technician-Demanded Tests: Descriptions
and Error Codes
Always investigate tests in the order presented in Table 57 when inspecting errors
in the system. By clearing error codes associated with the Control Channel Loop
Around Test, for example, you may also clear errors generated from other tests in
the testing sequence.
Note:
a. For a complete description of these tests, refer to the "XXX-BD (Common
Port Circuit Pack)" Maintenance documentation.
Table 57. System Technician-Demanded Tests: ANN-BD
Order of Investigation
Short Test
Sequence
Long Test
Sequence
Reset
Board
Sequence D/ND
1
1. D = Destructive, ND = Non-destructive
Control Channel Loop Around Test (#52) (a) X ND
Angel-Speech Processor (SP) Handshake Test
(#208) X ND
Clock Match Inquiry (#212) X X ND
Super Frame Match Inquiry (#211) X X ND
140AY Loop Around Test (#210) X X ND
Announcement Checksum Test (#209) X X ND
Network Processor Element (NPE) Audit Test
(#50) (a) X ND
SAKI Test (#53) (a) X D
Continued on next page