Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 1450 / 1930

Maintenance Objects
1450
Issue 5 October 2002
Signaling Link State Check Test (#255)
As is noted in the general description for a PRI Endpoint Port, the operation of the
PRI Endpoint Port depends on the health of the UDS1 interface circuit pack and of
the TN765 Processor Interface Link. This test checks the status of those critical
elements.
Table 384. TEST #255 Signaling Link State Check Test
Error
Code Test
Result Description/Recommendation
ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
1700 ABORT Rollabout video abort. The PRI terminal adapter associated with this PRI
endpoint extension is detached from the circuit pack. This is a normal abort
when the rollabout video feature is enabled. To complete the test on this port,
do one of the following:
1. Re-attach the disconnected PRI terminal adapter, or
2. Disable the rollabout video feature on this circuit pack by entering the
change ds1 PCSS command, and set the field
Alarm when PRI
Endpoint Detached?
to y.
4 FAIL There is a problem with the Signaling Channel and/or with the Processor
Interface Link.
1. Consult the procedure for the ISDN-PRI Signaling Group (ISDN-GRP)
and/or the procedures for Packet Interface (PKT-INT). Further information
may also be obtained by consulting the procedures for the ISDN-PRI
Signaling Channel (ISDN-LNK).
8 FAIL There is a problem with the UDS1 interface circuit pack.
1. Consult the procedures for UDS1 interface circuit pack (UDS1-BD).
PASS The signaling link hardware is okay.
Continued on next page