Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 432 / 1930

Maintenance Commands
555-233-119 432
Issue 5 October 2002
BRI
(cont’d) 0-126 L3-Assigned ext blank Transitory state for BRI endpoints
which support MIM initialization.
2. Wait for five seconds and repeat
the command. If the state has not
changed, continue with Step 2.
3. Make sure SPID administration on
the switch and endpoint are
consistent. Verify the repair by
executing the status bri-port
PCSSpp command. Determine
that the L2 state of the signaling
link is L3-Established. Otherwise,
go to Step 3.
4. Try to replace the endpoint. Verify
the repair by executing the status
bri-port PCSSpp command.
Determine that the L2 state of the
signaling link is L3-Established.
BRI
(cont’d) 0-126 L3-Assigned ext yes Transitory state for BRI endpoints
which support MIM initialization when
SPID Facility Test initializes the
station.
5. Wait for five seconds and repeat
the command. If the state has not
changed, continue with Step 2.
6. Make sure SPID administration on
the switch and endpoints are
consistent. Verify the repair by
executing the status bri-port
PCSSpp command. Determine
that the L2 state of the signaling
link is L3-Established. Otherwise,
go to Step 3.
7. Try to replace the endpoint. Verify
the repair by executing the status
bri-port PCSSpp command.
Determine that the L2 state of the
signaling link is L3-Established.
ASAI 0-126 Hyperactive ignore ignore Link has sent too many messages per
unit time.
Table 23. Status BRI-Port Command Interpretation — Continued
Endpoint
Types TEI
Range Layer 2
State Voice
Extension Service
SPID
Description / Recommendation
Continued on next page