Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 777 / 1930

ATM-TRK (Circuit Emulation Service Circuit Pack)
Issue 5 October 2002
777
555-233-119
Aux Data XX
Table 100. ATM Board Error Query Test (#1259)
Error
Code Test
Result
Description/Recommendation
2000 ABORT Test request timed out.
2031 ABORT SCD failure. Unable to sent down-link message.
2100 ABORT Could not allocate needed system resources.
2500 ABORT Internal system error
Retry the command up to 3 times at 1-minute intervals.
XXYY FAIL On-board error XX ( Table 101 ) and/or off-board error YY ( Table 102 on page
778 ).
Examine the error logs and repair any errors found.
PASS The ATM circuit pack has passed this test. No service effecting errors/alarms
have been detected on board.
0 NO
BOARD ATM-TRK circuit pack not found
Check the error log, and correct Error 125 (wrong board) or Error 131 (no
board), if found.
Make sure that the board is properly translated and inserted.
Check for hyperactivity (Error 1538). Run reset board UUCSS if
hyperactive.
Run the test again. If it fails, replace the board, and retest.
Continued on next page
Table 101. Aux Data XX for ATM Board Error Query Test (#1259)
If XX= Then
1 ATM framer chip failed
2 NCE chip failed
3 LANHO critical error
4 TDM Programmable Logic Device Failed
5 All on-board DSPs failed
6 Receive Network Processor failed
Continued on next page