Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 532 / 1930

Maintenance Commands
555-233-119 532
Issue 5 October 2002
test analog-testcall
Use test analog-testcall to run facility diagnostic tests on:
■
an entire trunk group
■
an individual trunk group member
■
an individual trunk port
■
all trunks on a board
The type of test call, the far-end test line number, and other parameters are
administered on the trunk group screen before executing the command. The user
should only invoke the full or supervision test. The other options are provided
primarily for testing when setting up an ATMS schedule.
Action/
Object
Qualifier Qualifier Description Logins Defaults
Feature
Interactions
test
analog-
testcall full
no super-
vision
no-selftest
no-return-
loss
no-st-or-rl
repeat
number
schedule
Executes the most comprehensive test call
available using the administered test set
type.
Executes a supervision-only test call
(approx. 10 sec.) and confirms the presence
of the test set at the far end.
Executes the “full” test (skips any self-test
sequences), saving about 20 seconds on
the type 105 transmission test and has no
effect on type 100 or 102 transmission tests.
Executes the “full” test (skips any return loss
sequences), saving about 20 seconds on
the type 105 transmission test and does not
have any effect on type 100 or 102
transmission tests.
Executes the “full” test (skips all self test and
return loss sequences), saving about 40
seconds on the type 105 transmission test
and does not have any effect on type 100 or
102 transmission tests.
How many times each test in the sequence
is repeated (1-100)
Use the screen to schedule execution of the
command. The command is placed in the
command queue and is executed at the
specified time. The information displayed by
the command is sent to the system printer
instead of the screen.
1
init
inads
craft
cust Test
sequence
= long;
repeat = 1 See below