Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 411 / 1930

set signaling-group
Issue 5 October 2002
411
555-233-119
set signaling-group
Use set signaling-group to upgrade secondary D-channel in specified signaling
groups to primary D-channels. Current primary D-channel then revert to
secondary D-channels. A signaling group is a collection of B-channels that
designate single D-channels or a set of D-channels signals over an ISDN-PRI.
set synchronization
Use set synchronization to set DS1 trunks or active tone/clock circuit packs that
supply references for synchronization. The set synchronization command works
after disable synchronization disables synchronization.
DS1 or tone/clock circuit packs remain synchronization references until set
synchronization runs with another board or until enable synchronization runs.
After enable synchronization runs, administered primary or secondary
synchronization sources become synchronization references. If no primary or
secondary source is administered, synchronization uses active tone/clock boards
as synchronization references after synchronization is enabled.
The synchronization subsystem provides error-free digital communication
between the switch and other PBXs, COs, or customer premise equipment.
System components involved in synchronization include: TDM bus clock, DS1
trunk board, and maintenance and administration software resident in the SPE.
Action/Object Qualifier Qualifier Description Logins Defaults Feature Interactions
set
signaling-group group
identifier administered number
associated with each
signaling group. init
inads
craft none none
Action/Object Qualifier Qualifier Description Logins Default Feature Interactions
set
synchronization location Physical position of the DS1
trunk or active tone/clock:
PCSS init
inads
craft none none