Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 1707 / 1930

TIE-TRK (Tie Trunk)
Issue 5 October 2002
1707
555-233-119
Tie Trunk Seizure Test (#73), Tie Trunk Dial Test
(#747). Seizure Test(#73)
The Tie Trunk Seizure Test activates the M lead and checks for a response from
the external end within 10 seconds. This test is applicable only to wink start and
delay dial outgoing trunks. (For the TN2140B circuit pack, the trunk must also be
continuous-seize-ack and discontinuous-seize-ack).
The Tie Trunk Dial Test seizes the trunk and outpulses a pause digit.
For a port administered as TGU or a TGE, the Seizure Test internally seizes the
trunk and outpulses a “pause.” The report reports the result of the seizure attempt
uplink.
0 NO
BOARD The test could not relate the internal ID to the port (no board).
1. Check to ensure that the board translations are correct. Translate the
board, if necessary.
2. Issue the busyout board command.
3. Issue the reset board command.
4. Issue the release busy board command.
5. Issue the test board command. This should re-establish the linkage
between the internal ID and the port.
Table 503. TEST #36 Audit Update Test — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page