Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 458 / 1930

Maintenance Commands
555-233-119 458
Issue 5 October 2002
Drop
Reason
(cont’d)
“Endpoint” = Clearing received from DS1. The endpoint initiates the
disconnect. The endpoint notifies the MCU that it intends to disconnect.
“Far-end” = Clearing received from DS1. The network or endpoint initiate
the disconnect.
“Handshake” = Framing is never found or is lost for over 40 seconds and
the endpoint is disconnected. (the endpoint could not complete
initialization due to problems with finding Frame Alignment Signal (FAS),
Multi Frame Alignment (MFA) and corrected coded cap-sets)
“IDtimeout” = The H3.20 user unsuccessfully (three times) sends MCU
responses regarding the UIN/password Query. Each timeout period is
administered.
“Internal” = MCU has a problem allocating the necessary trunk resources
to route dial-out calls for specified dial-numbers. This problem is
associated with routing patterns or trunk-associated translation (for
example, TAC specified in the dial-out number or routing pattern points to
a trunk group without members), or indicates a lack of trunk resources (for
example, all trunk members are maintenance busy or all in-service
members are busy on a call).
“Network” = Clearing received from DS1. The disconnects the endpoint.
The endpoint with the disconnect notification capability disconnects
without notifying the MCU.
“Not-MCU” = The dial-out destination numbers of the “CAS” extensions
terminate to numbers that are not dial-in cascade MCU extensions.
“No-ring” = The is up for 30 seconds and no ringing is detected.
“Reorder” The MCU CPTR resources detect that no network trunks are
available to place the call. See “Dial-out” for a description of CPTR usage.