Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 1877 / 1930

VAL-BD (Voice Announcements over LAN Circuit Pack)
Issue 5 October 2002
1877
555-233-119
Maintenance Commands
The following table lists several VAL-related maintenance commands and how to
use the command for troubleshooting.
Table 559. VAL maintenance commands
Command Use this command to
test board Test both circuit pack- and port-level maintenance.
test port Test any of the ports on the VAL circuit pack
test mo Test either of the 2 maintenance objects on the VAL circuit
pack
busyout board Curtail activity on the circuit pack before resetting it (reset
board).
release board Resume activity on the circuit pack after busying out the VAL
circuit pack or ports on it (busyout board or busyout port).
busyout port Isolate a specific port usually during troubleshooting.
release port Resume activity after busying out a port on the VAL circuit
pack (busyout port).
reset board Re-initialize the circuit pack in the system and upload
announcement file information.
reset val Reset the circuit pack if it is in the insane state and to
override querying the board to determine if an
announcement autosave is in process.
status data-module Obtain general information about the data-module
connection to port 33 on the VAL circuit pack
status firmware download Obtain information about a demand or scheduled firmware
download.
list sys-link Generate a list of administered links and the general status
of each.
status sys-link Generate a detailed status report for a specific administered
system link.
status link Generate a status report about a specific administered
ethernet link. (For VAL this means the administered ethernet
link.)
status val-ip Generate an IP-related, MIB data status report.
netstat ip-route Generate a report showing the status of the VAL IP routes on
the VAL circuit pack.
Continued on next page