Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 421 / 1930

status audits
Issue 5 October 2002
421
555-233-119
Audit information displays with one line of data displayed audit that has detected
an error or aborted. Audits that did not detect any errors or aborted do not display.
The output sorts in descending order, based on the sum of the values in the
#
Cycles Fixed Data
,
# Cycles Could Not Fix Data
, and
# Cycles
Audit Aborted
fields.
Field descriptions
Start Date
Date and time that interval begins.
“cumulative” = date and time of the last reboot or execution of the
“clear audits cumulative” command.
“peak-hour” = date and time of the beginning of the peak hour since
the last reboot or execution of a “clear audits cumulative” or “clear
audits peak-hour” command.
# of Audit Cycles
Completed
Number of audit cycles completed in the specified interval
(0 – 999999). Asterisks indicate numbers that exceed 999999. The
switch executes audits in a set order. After all audits execute, the
switch restarts the sequence.
NOTE:
Since this field shows the number of completed audit cycles,
it is possible that individual audit values can be larger than
the values described below, if the switch is partially through
another audit cycle. Audit Cycles numbers do not apply to the
audits that execute as part of scheduled maintenance.
Audit Name
Audit’s name that detected an error or aborted. A few audits do not
run in the normal audit sequence. These audits run as part of
scheduled maintenance and are marked with “(SCH)”.
status audits peak-hour
AUDIT STATUS INFORMATION
Start Date: 10:00 MON MAR 22 1997 # of Audit Cycles Completed: 25
Audit # Cycles # Cycles Could # Cycles
Name Fixed Data Not Fix Data Audit Aborted
HTLK 0 25 0
HU-CALLS 2 0 0
CR-AUDIT 1 0 0
DE-CALLS 1 0 0
CTRK 0 1 0
AT-ADM 1 0 0
CO-ADM 1 0 0
SE-CALLS 0 0 1
PRI-USR (SCH) 1 0 0