Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 656 / 1930

Maintenance Objects
555-233-119
656
Issue 5 October 2002
ANL-LINE (8-Port Analog Line),
ANL-NE-L (8-Port Neon Analog Line)
The 8-Port Analog Line circuit packs are:
■
TN742
■
TN769
■
TN467
These circuit packs provide 8 ports for single line on-premises or off-premises
analog endpoints such as analog voice terminals, queue warning level lamp,
recorded announcements, dictation machines, PagePac
™
paging equipment,
external alerting devices, modems, facsimile machines, and AUDIX voice ports.
The TN769 supports a neon message waiting lamp. The other 8-port analog lines
do not support the lamp.
Test #48 applies momentary ringing voltage to terminal equipment and monitors
resulting current flow to determine whether the equipment is connected to the
port. Test #48 may cause some terminal equipment to ring briefly during daily
maintenance. If this disturbs the user or the phone equipment, to disable Test #48
use change station
extension
and set the
Tests
field to n. On some software
releases, this will also disable Tests #6, 7, 161, and 35.
Test #47 may cause a false alarm when the port is connected to off-premises
equipment, some non-voice terminal equipment, and some loop equipment. If this
is the case, disable the test using the Tests field of the change station
extension
command.
No maintenance of the terminal connected to the 8-Port Analog Line circuit pack
or 8-Port Neon Analog Line circuit pack is performed, except to determine
whether or not the terminal is connected. Failures of the neon message waiting
lamp power (for ANL-NE-L only) and the common ringing application circuitry are
reported as part of the Common Port Circuit Pack errors (see errors 1281 and
1793 in the XXX-BD (Common Port Circuit Pack) Maintenance documentation).
MO Name (in Alarm
Log) Alarm Level Initial Command to Run
1
1. Where P is the port network number (1 for PPN); C is the carrier designation (for example, A, B, or
C); SS is the address of the slot in the carrier where the circuit pack is located (for example, 01, 02,
etc.); and pp is the 2-digit port number (for example, 01).
Full Name of MO
ANL-LINE MIN test port PCSSpp l 8-Port Analog Line
ANL-LINE WRN test port PCSSpp sh 8-Port Analog Line
ANL-NE-L MIN test port PCSSpp l 8-Port Neon Analog Line
ANL-NE-L WRN test port PCSSpp sh 8-Port Neon Analog Line