Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 542 / 1930

Maintenance Commands
555-233-119 542
Issue 5 October 2002
test customer-alarm
Use test customer-alarm to run hardware diagnostic tests on the leads of the
Processor and EPN maintenance circuit packs, used for customer-provided
alarms by closing the appropriate relay for 1 minute. Failure is verified by
checking the customer alarm attached to the specified circuit pack.
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
test customer-
alarm location Extension of the data module or
data channel to be tested (per
dial-plan) init
inads
craft cabinet =1
carrier = a
repeat = 1
none
short Runs test number 115
long Runs test number 115 (same as
short test option)s
repeat
number How many times each test in the
sequence is repeated (1-100)
clear This option causes the test
sequence (short or long) to repeat
until the alarm (if any) is cleared or
a single test in the sequence fails.
1
1 If no alarms are registered against the maintenance object then the test sequence is run only once. The long
clear option forces a clear of all alarms if no errors are encountered during testing. The short clear option only
clears alarms pertinent to tests in the short sequence.
schedule Use the screen to schedule
execution of the command. The
command is placed in the
command queue and is executed
at the specified time. The
information displayed by the
command is sent to the system
printer instead of the screen.
2
2 See the Report Scheduler and System Printer feature specification for more details.
Examples:
test customer-alarm
test customer-alarm schedule
test customer-alarm 02 r 2
test customer-alarm 01b r 25
test customer-alarm 01b r 25
schedule
test customer-alarm 2a
test customer-alarm 2a sh
test customer-alarm 01b l
schedule
test customer-alarm 3 c