Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 1260 / 1930

555-233-119
1260
Issue 5 October 2002
Use Table 296 to interpret the Error Log entries.
Table 296. INADS Link Error Log Entries Test
Error
Code Test
Result Description/ Recommendation
1 0 The call was successfully placed to INADS. No trouble found.
2 0 Informative error indicating that alarm origination was disabled at the time
of the test. The test runs even if alarm origination is disabled.
1. If Alarm Origination is desired, then enable this feature with the
Maintenance-Related System Parameters Form.
2. Repeat the test.
3 0 The INADS connection is currently in use.
1. Wait 10 minutes and retry this command.
4 0 INADS did not answer the alarm origination call.
1. Verify INADS is up and running.
2. Verify the INADS phone number and switch product ID are correct via
the Maintenance-Related System Parameters Form.
3. Enable alarm origination via the Maintenance-Related System
Parameters Form and test the PR-MAINT (Maintenance/Tape
Processor) by issuing the test processor a|b command. If PR-MAINT
Tests #102 and #103 do not pass, then refer to
‘‘PR-MAINT
(Maintenance Processor)’’ Maintenance documentation.
4. Retry the command.
5 0 No INADS phone number administered.
1. Administer the INADS phone number via the Maintenance-Related
System Parameters Form.
2. Retry the command.
6 0 INADS did not send the acknowledgment message to the “test inads alarm”
message.
1. Verify the INADS phone number and switch product id are correct via
the Maintenance-Related System Parameters Form.
2. Verify INADS is up and running.
3. Retry the command.
7 0 INADS sent a negative acknowledgment to the “test inads alarm” message.
8 0 Internal system error; system received an invalid return code.
9 0 Internal system error
1. Try the command again at 1-minute intervals up to 5 times.
Continued on next page