Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 76 / 1930

Maintenance for CSI systems
555-233-119 76
Issue 5 October 2002
If the call does not go through (that is, no ringing), determine if the trunk
circuit pack has been removed.
!
CAUTION:
To leave the Facility Test Call administered after you logoff poses a
significant security risk that unauthorized individuals may connect to
the telecommunications network through the use of test call features.
To remove the Facility Test Calls Access Code:
a. Type change feature-access-codes and press
Enter
.
The Feature Access Code screen appears.
b. Leave the
Facility Test Calls Access Code
field blank.
Touch-tone (DTMF) Receiver Test Call
The touch-tone (DTMF) receiver call accesses and tests the four touch-tone
(DTMF) receivers located on the TN744D Tone Detector circuit pack. To place the
call:
1. Dial the Facility Test Call Feature Access Code and listen for dial tone.
The Feature Access Code is set on the Feature Access Codes screen.
2. Dial the 6-digit port number PCSSpp:
3. Listen for one of the following tones:
■
Confirmation Tone—touch-tone (DTMF) receiver is connected. Go
to Step
4 .
■
Reorder Tone—touch-tone (DTMF) receiver is busy.
■
Intercept Tone—a touch-tone (DTMF) receiver or trunk has not been
accessed.
4. Dial 1234567890*#.
5. Listen for one of the following tones:
■
Confirmation tone—test passed.
■
Intercept tone—test failed. The test fails if the touch-tone (DTMF)
receiver does not recognize all the touch-tone (DTMF) signals.
6. To test another touch-tone (DTMF) receiver, repeat Steps 2 through 4 .
7. To terminate the test call, hang up the station used for testing.
P = Port network number (1)
C = Carrier number (A=1, B=2, C=3)
SS = Slot number (01-10)
pp = Touch-tone (DTMF) Receiver Port number (01, 02, 05, or 06)