
ANL-24-L (24-Port Analog Line)
Issue 5 October 2002
651
555-233-119
Table 42. TEST #48 Station Present Test
Error
Code
Test
Result
Description/Recommendation
ABORT
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1000
ABORT
System resources required to run this test are not available. The port may be
busy with a valid call.
1004
ABORT
The port was seized by a valid call during the test. The test has been
aborted.
1. Use display port PCSSpp command to determine the station
extension.
2. Use status station to determine the service state of the port.
3. If the port is in use, wait until the port is idle and retry the command at
1-minute intervals a maximum of 5 times.
1005
ABORT
The test was aborted due to a configuration problem. This test may not be
applicable or it may be disruptive to terminal equipment other than a voice
terminal (for example, the modem pool member or Music On Hold).
1008
ABORT
Could not allocate a ringing circuit. Either all the ringing circuits are in use or
the ringing generator is defective or it is not wired correctly.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to abort, look for RING-GEN errors in the Error Log.
If an ABORT 1008 occurs for this test on other circuit packs as well, the
ringing generator may be defective or is not wired correctly (see errors
for RING-GEN). If it does not occur on other ports, all four ring phases
are in use.
1018
ABORT
The test has been disabled by administration.The default for the
Test
field
on the station screen is y. Determine why this field has been set to
n
on this
station (this may be due to the brief ringing disturbance that this test may
cause).
1. To enable the test for a particular station being tested, enter change
station extension and set the
Test
field on the Station screen to y.
2000
ABORT
Response to the test request was not received within the allowable time
period.
2100
ABORT
Could not allocate necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page
Содержание DEFINITY Server CSI
