Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 1018 / 1930

555-233-119
1018
Issue 5 October 2002
Digital Terminal Lamp Update (#16)
This test updates internal lamp states that can or cannot be shown on the actual
PC graphical user interface. The lamp updates run only if the station is in-service.
The status of the station is checked and the lamp updates are blocked from taking
place if the station is not in the in-service state. This test does not affect the status
of the Message Waiting lamp.
Table 195. TEST #1373 Signaling Path PING Test
Error
Code Test
Result
Description/Recommendation
2100 ABORT Could not locate the necessary system resources to run this test.
Retry the command at 1-minute intervals, up to 5 times.
Escalate if the problem persists.
2500 ABORT Internal system error
Retry the command at 1-minute intervals, up to 3 times.
Escalate if the problem persists.
1003 FAIL Ping to the destination failed.
Retry the command at 1-minute intervals, up to 3 times.
Investigate any C-LAN ethernet port errors.
1007 FAIL The system could not PING the registered endpoint via the C-LAN.
Verify that at least one destination reachable through this port. PING this
destination (ping ip-address xxx.xxx.xxx.xxx).
If the PING to any destination is successful through this port, the link is up.
If PING to all destinations fail, test the C-LAN port (test port UUCSSpp
short) and follow repair procedures for Session Status Test (#1286) failures.
If only this station cannot be pinged:
Make sure the PC is up
Make sure the PC has a network connection (ethernet or dialup)
Check the ethernet cabling
PASS The system can successfully send IP packets to the registered endpoint
from the C-LAN.
Continued on next page