Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 1351 / 1930

MAPD-BD (MAPD Interface Circuit Pack TN802)
Issue 5 October 2002
1351
555-233-119
If there is no reply:
a. Escalate the problem or replace the circuit pack. The problem is not
with the external network but within the circuit pack.
3. At the command prompt, type ping nnn.nn.nn.nn (the external IP trunk
server address) and press
Enter
.
If configured correctly, the system displays:
Reply from nnn.nn.nn.nn: bytes=32 time <##ms TTL=###
If there is no reply, verify the IP address and check the physical
connections to and from the TN802 circuit pack.
4. At the command prompt, type ping nnn.nn.nn.nn (the IP address of
another computer on the network) and press
Enter
.
If configured correctly, the system displays:
Reply from nnn.nn.nn.nn: bytes=32 time <##ms TTL=###
If there is no reply
a. Verify the IP address
b. Check the physical connections to and from the TN802 circuit pack.
c. Check the internal cables on the TN802 circuit pack (Notes 4 and 6
in Figure 42 on page 1354 ).
d. Try pinging another device on the same subnet.
e. Try pinging the gateway to the rest of the network from the subnet.
f. Try pinging a device not on the local subnet but on the network or
another subnet.
5. When finished, at the command prompt type exit and press
Enter
.
Internal connections to the LAN
Test the internal connections to the LAN by pinging the
■
local host
■
internal IP trunk server
■
another device connected to the network:
1. Click Start in Windows (lower lefthand corner), then select Programs, then
Command Prompt.
This starts a DOS command line session.
2. At the command prompt, type ping 127.0.0.1 (the local host default
address) and press
Enter
.
If configured correctly, the system displays:
Reply from nnn.nn.nn.nn: bytes=32 time <##ms TTL=###