Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 556 / 1930

Maintenance Commands
555-233-119 556
Issue 5 October 2002
Setting the Test Parameters
Enter test hardware-group and the object (board, carrier, etc.). The following
screen appears.
Field descriptions
Test
sequence
Short (nondestructive) or long (more comprehensive, still
nondestructive) test sequence
Test
Repetition
repeat - (1-99) each test is executed the number of times specified on
each physical object.
continuously -all tests on all the specified hardware run until
cancelled by either pressing the
CANCEL
key or by executing the
cancel hardware-group command.
count
Repeat test sequence value (1-99). If the
Test sequence
field is set
to continuously, then this field disappears from the screen; if this field
is set to repeat, then the field appears.
Auto-page
Provides a new screen every time the SAT screen fills with test results.
(n / y). The screen does not scroll to accommodate new results. A new
screen appears after the current screen fills up.
If auto-page is not selected, the SAT screen does not refresh once it is
filled, and testing stops until the user enters the
PAGE
key to continue
or the
CANCEL
key to cancel the testing.
This option is not allowed if the background option is selected.
test hardware-group system Page 1 of 1
TEST HARDWARE-GROUP SELECTIONS
Select the desired options for the specified test.
Test sequence: short
Test repetition: repeat count: 1
Output OPTIONS: HARDWARE OPTIONS:
Auto-page? n All-ports? n
Background? n SPE-interchange? n
Failures? n