Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 431 / 1930

status bri-port
Issue 5 October 2002
431
555-233-119
BRI 0-126 Established ext blank Normal state for non-MIM initializing,
fixed and automatic TEIBRI endpoints.
BRI,
ASAI 64-126 Established blank blank Transitory state for automatic TEIBRI
endpoints which support MIM
initialization.
1. Verify that SPID administration on
the switch and endpoint are
consistent. Verify the repair by
executing the status bri-port
PCSSpp command. Determine
that the L2 state of the signaling
link is L3-Established. Otherwise,
proceed to Step 2.
2. Try to replace the endpoint. Verify
the repair by executing the status
bri-port PCSSpp command.
Determine that the L2 state of the
signaling link is L3-Established.
BRI 64-126 L3-Establish
ed ext blank Normal state for automatic TEIBRI
endpoints supporting MIM
initialization.
BRI,
ASAI 64-126 L3-
Established blank yes Technicians conduct SPID facilitation
tests on the port. Links are not
associated with BRI port endpoints.
See description of SPID Facility Test
Procedures in the
‘‘BRI-SET,
ASAI-ADJ, BRI-DAT’’ maintenance
documentation.
BRI 64-126 L3-
Established ext yes Technicians conduct SPID facilitation
tests on the port. Links are associated
with port endpoints. See description of
SPID Facility Test Procedures in the
‘‘BRI-SET, ASAI-ADJ, BRI-DAT’’
maintenance documentation.
BRI 0-126 L3-
Established blank blank Invalid SPID assigned to link.
1. Change the SPID value in the BRI
endpoint to match the SPID
administered to the BRI endpoint
on the port. Verify the repair by
executing the status bri-port
PCSSpp command. Determine
that the L2 state of the BRI
endpoint is L3-Established.
Table 23. Status BRI-Port Command Interpretation — Continued
Endpoint
Types TEI
Range Layer 2
State Voice
Extension Service
SPID
Description / Recommendation
Continued on next page