Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 745 / 1930

ATM-INTF (TN2305/6)
Issue 5 October 2002
745
555-233-119
LED states
The ATM-INTF circuit pack has the standard red, green and yellow LEDs. The red
and green LEDs have the traditional use: red indicates an alarm condition, green
means maintenance testing in progress. The yellow LED is not used. The possible
LED states are listed below:
Error Log Entries and Test to Clear Values
Notes:
a. Error Type 23: ATM Expansion Interface circuit pack is administered with
change circuit-pack, but has not been inserted into the system. Insert the
circuit pack.
b. Error Type 125: A wrong circuit pack is located in the slot where this circuit
pack is logically administered. To resolve this problem, either remove the
wrong circuit pack or insert the logically administered circuit pack.
c. Error Type 217: The ATM circuit pack is physically present but has not
been given a personality. Remove the circuit pack or administer it using the
add atm pnc command or add atm trunk command.
LED Condition LED
Red Board is not healthy Solid on, never off
Red
Green Board is in the processes of booting Red: solid on
Green: 200 ms on 200 ms off
Green Maintenance is running tests on the board Solid on,
off when maintenance completed
Yellow Fiber LOS 100 ms on, 100ms off
Yellow Signal to the ATM switch is down 500 ms on, 500 ms off
Error
Type Aux
Data
Associated Test
Alarm
Level On/Off
Board
Test to Clear Value
23( a ) 0 None WAR OFF
125( b ) None MIN ON
217( c ) 0 None WAR OFF