Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 513 / 1930

status system
Issue 5 October 2002
513
555-233-119
status system
Use status system to display the status, mode, and operational attributes of the
SPE(s), TDM and Packet busses, tone-clock circuit pack(s), and emergency
transfer switch of single or all cabinets in the system.
!
CAUTION:
The purpose of this command is to provide general information about the
cabinet status. This information may not display correctly when the cabinet
is in a transient period. In this case, wait for 1 minute and enter the
command again.
Output
The following example shows the output from status system all-cabinets.
Field descriptions
Action/Object Qualifier Qualifier Description Logins Defaults Feature Interactions
status system cabinet 1st-cabinet: PPN
Examples:
status system 1st-cabinet
status system all-cabinets init
inads
craft
cust
rcust
bcms
browse none none
SPE
Switch Process Element (SPE) identifier (
1A
or
1B
)
status system all-cabinets Page 1 of 3 SPE B
SYSTEM STATUS CABINET 1
SELECT SPE ALARMS TONE/ SERVICE SYSTEM SYSTEM
SPE MODE SWITCH MAJOR MINOR CLOCK STATE CLOCK TONE
1A active 0 2 1A in active active
SERVICE CONTROL DEDICATED SERVICE BUS ALARMS BUS OPEN BUS
TDM STATE CHANNEL TONES PKT STATE MAJOR MINOR FAULTS LEADS
1A in y n 1 in n n
1B in n y
EMERGENCY SELECT SERVICE CABINET
TRANSFER SWITCH EXP-LINK STATE MODE TYPE
1A auto-off - CMC
1B