Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 1698 / 1930

Maintenance Objects
1698
Issue 5 October 2002
Notes:
a. Digit time-out. This occurs when the far-end PBX begins transmitting digits
too late (10 seconds) after receiving the signal indicating ready to receive
digits (if any). This can occur on an incoming immediate, wink, or delay dial
line. Check the far-end PBX to ensure a translation match at both ends.
b. Rotary dial before wink. This occurs when the far-end PBX starts dialing
before the PBX sends the wink on a wink-start or (for non-TN439 circuit
packs) on a delay-dial line. Check the far-end PBX to ensure a translation
match at both ends.
c. Rotary dial too early. This occurs when the far-end PBX starts dialing too
soon (about 50ms) after seizure on a wink start or (for non-TN439 circuit
packs) on a delay-dial line. Check the far-end PBX to ensure a translation
match at both ends.
2049 NPE Crosstalk (#6) MAJ/MIN/
WRN
1
,
MINOR
ON test port PCSSpp l r 3
2
2305
(m) 50944 None; Seizure
(#73)
3
; Tie Trunk
Dial (#747)
2305
(m) 57424 Tie Trunk Dial (#747)
2561
3
0
3
None
3
v WARNING
3
OFF
3
2817
3
0
3
None
3
MINOR
3
OFF
3
3073
3
0
3
None
3
3840 (n) 8000 Analog Transmission
(#844-848) OFF
3841 (n) Analog Transmission
(#844-848) MINOR OFF test analog testcall
PCSS pp r 2
1. Minor alarms on this MO may be downgraded to Warning alarms based on the values used in the
set options command. If the MINOR alarm is not downgraded by the set options values, the
MINOR alarm is upgraded to a MAJOR alarm if 75 percent of the trunks in this trunk group are
alarmed.
2. Non-TN497 circuit packs only.
3. TN497 circuit packs only.
Table 500. TIE Trunk Error Log Entries — Continued
Error
Type
Aux
Data Associated Test Alarm Level
On/Off
Board Test to Clear Value
Continued on next page