Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 573 / 1930

test pkt
Issue 5 October 2002
573
555-233-119
test pkt
Use test pkt to run a series of tests on the Packet bus of a PPN.
!
WARNING:
Since the “clear long” options clear all counters if tests pass, it is possible for
firmware counters to be cleared even when a problem exists. In some cases
customer service might degrade since calls may be routed over defective
equipment.
Action/
Object
Qualifier Qualifier Description Logins Defaults
Feature
Interactions
test pkt
port-
network pn
number
short
long
repeat
number
clear
schedule
The Packet bus to be tested: nn (1)
Option for a brief series of nondestructive
diagnostic tests.
Option for a longer, more comprehensive
series of both destructive and
nondestructive diagnostic tests.
How many times each test in the sequence
is repeated (1-100)
This option causes the test sequence
(short or long) to repeat until the alarm (if
any) is cleared or a single test in the
sequence fails.
1
Use the screen to schedule execution of
the command. The command is placed in
the command queue and is executed at
the specified time. The information
displayed by the command is sent to the
system printer instead of the screen.
2
Examples:
test pkt port-network 1 l
test pkt port-network 1 sh r 2
test pkt port-network 1 sh schedule
test pkt port-network 1 l r 25
test pkt port-network 1
test pkt port-network 1 c
1 If no alarms are registered against the maintenance object then the test sequence is run only once. The long
clear option forces a clear of all alarms if no errors are encountered during testing. The short clear option only
clears alarms pertinent to tests in the short sequence. SEE WARNING BELOW.
2 See the Report Scheduler and System Printer feature specification for more details.
init
inads
craft Test
Sequence
= short;
Repeat = 1 none