Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 436 / 1930

Maintenance Commands
555-233-119 436
Issue 5 October 2002
Field descriptions
Status
“inserted” = valid memory card is in the memory card slot. When
the status is “inserted,” the switch can perform I/O operation to the
memory card
“no card” = no memory card is inserted or the inserted memory
card has a bad connection
“unformatted” = the inserted memory card is unformatted or the
switch cannot recognized it.
Write-Protection
“N/A” = Beginning with Release 9, the memory card has no write
protect switch and no equivalent software mechanism.
Number of Erase
Pulses
Number of pulses counted in the last erase operation on a Series 1
memory card. This field is blank for Series 2 memory cards due to
different algorithm of erase operations between the two series.
Translation
Storage Space
Used (%)
Percentage of reserved storage space for storing translation files in
the memory card that saves translations to the memory card.
NOTE:
This percentage is valid for the specific memory card used in
the most recent save translation operation (which is
implemented with the save translation command or with
scheduled maintenance and save translation enabled). If the
memory card is replaced with another card, or if no save
translation is performed on the new memory card, the
percentage does not indicate the translation storage space
used in the new card.
File Name
Each formatted memory card has reserved a fixed space in the
card for each file. The starting address and size of each reserved
slot is pre-determined according to the capacity of the memory
card. The file name as defined in Table “Capacity of Memory Card”
is shown in this field.
Data Present
The “Data Present” field is y when the file contains valid data.
Otherwise, the “Data Present” field has a value of “n.”
Date Time
This field shows the date and time when the file was saved into the
memory card. For the “Software Upgrade” type of memory card,
this field contains the system software release number instead of
the time stamp. Due to the restriction of “core dump” file format, the
year information is not available in the date/time string.