Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 1550 / 1930

Maintenance Objects
1550
Issue 5 October 2002
Station Status and Translation Audits and
Updates Test (#36)
This test updates the analog port’s message lamp state (if it has one) and
translations with information in the software.
Table 435. TEST #36 Station Status and Translation Audits and Updates
Error
Code Test
Result
Description/ Recommendation
ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1004 ABORT The port was seized by a valid call during the test, and the test was
aborted. Use the display port UUCSSpp command to determine
the station extension. Use the status station command to determine
the service state of the port. If the port is in use, wait until port is idle.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1005 ABORT The test was aborted due to a configuration problem. This test may
not be applicable, or it may be disruptive to terminal equipment other
than a voice terminal (for example, the modem pool member or
Music On Hold).
2000 ABORT Response to the test request was not received within the allowable
time period.
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1 FAIL This does not indicate a hardware problem. The switchhook audit
failed. The other updates were not performed because of this failure.
This may occur when the audit is performed at the same time the
terminal equipment goes off-hook. Use the status station command
to determine when the port is available.
1. Retry the command at 1-minute intervals a maximum of 5 times.
5 FAIL This may be an internal software error. The message waiting lamp
update failed. The translation and ringer updates were not performed
because of this failure.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page