Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 534 / 1930

Maintenance Commands
555-233-119 534
Issue 5 October 2002
Field descriptions
test board
Use test board to run a set of hardware diagnostic tests on a specified circuit
pack. The system first validates that the board exists at the specified location.
Then, based on the logical type of board (for example, Analog, Digital, Hybrid, and
others), a series of tests perform diagnostics on the board and then returns results
of the test along with any possible error codes. Some of the tests can be disabled
by administration.
For the R6csi system, test board 01A01 tests all of the components associated
with the processor circuit pack except for environmental components and system
links, which require the test environment and test sys-link commands. The
processor components are tested in the following order: PROCR, PR-MEM,
SW-CTL, PKTINT, DATA-BD, DATA-CHL, CARD-MEM, and PR-MAINT.
Port
The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being tested.
Maintenance
Name
The type of maintenance object that is being tested.
Alt. Name
Alternate way to identify maintenance objects.
If the Object isThe field contains
trunkxxx/yyy (where xxx = trunk group number
and yyy = member number)
Test No.
The test being executed
Result
Test result: Pass, Fail, Abort, Disabled, No Board, or Extra Board.
Error Code
Numeric code explaining why the release failed or aborted. See the
detailed list of the codes by test number for each MO.