Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 1204 / 1930

555-233-119
1204
Issue 5 October 2002
2. Type ping <source_ip_address> and press
Enter
to verify a
communication link to the source board.
3. Type ftp <source_ip_address> and press
Enter
.
4. Log in to the source circuit pack with the same ftplogin and ftppassword
that you used in the ‘‘Set up file system on circuit pack’’ section.
■
ftplogin is any temporary login for this FTP session (for example,
denver)
■
ftppassword is any temporary login, minimum 7 characters, for this
FTP session (for example, broncos).
5. Type bin and press
Enter
.
This transfers files in binary format.
6. Type put <filename.ext> and press
Enter
.
This command copies the new firmware image file to the destination
directory.
7. Type dir and press
Enter
.
Verify that the new firmware image file is on the circuit pack.
8. Type quit and press
Enter
.
This ends the FTP session.
Verify files
From the SAT verify that the new firmware image file is on the circuit pack.
1. Type list directory board <UUCSS> and press
Enter
.
The List Directory screen ( Screen 79 ) displays.
2. Verify that the new firmware image file is listed in the
File/Directory
Name
field.
Screen 79. List Directory screen
list directory board 1C12 Page 1
LIST DIRECTORY
Board File/Directory Creation Size
Location Name Date Time Kb
01C12 F:fwdlimg464gv01 2000/01/01 00:00:00 367
01C13 F:fwdlimg2302av01 2000/02/29 23:59:59 493
D = Directory F = File