Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 428 / 1930

Maintenance Commands
555-233-119 428
Issue 5 October 2002
Output
For the following example shows the output from status bri-port 1c1701.
Field descriptions
Port
ISDN-BRI port address.
Service
State
ISDN-BRI port is “in-service” or “out-of-service.”
Maintenan
ce Busy?
specifies if maintenance testing is executing on the ISDN-BRI port (y/n)
Layer 1
State
BRI Layer 1 (physical) state on the port.
■
activated = layer 1 frames are passing between the port and BRI
endpoints.
■
pend-activation = the port is in-service, the layer 1 interface device is
on, layer 1 frames are sending to the BRI endpoints connected to this
port, but BRI endpoints are not responding.
■
deactivated = the layer 1 interface device on the BRI is off, because the
port goes out-of-service.
TEI Value
Identifies the addressing parameter value (0–127).
Layer 2 addressing parameter used by the switch to exchange information
over point-to-point signaling links between BRI endpoints. Each
point-to-point signaling link has an associated TEI.
status bri-port 1c1701 Page 1 of 1 SPE A
STATUS BRI-PORT
Port: 01C1701
Service State: in-service
Maintenance Busy?: no
Layer 1 State: activated
TEI Value Layer2 State Endpt Extension Endpt SPID Service SPID?
Link1 64 13-established 1010 1010
Link2
Link3