Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 364 / 1930

Maintenance Commands
555-233-119 364
Issue 5 October 2002
monitor trunk
Use monitor trunk to display internal software status information. This command
helps to locate facilities to which the trunk is communicating. If a trunk group
number is entered without a member number, and with or without “/”, it is member
1. If a trunk group and member number are both entered, status for specified
members displays.
Output
The following example shows the output from monitor trunk 78/1.
Field descriptions
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
monitor trunk group
member
1 – 99. If a group number is
entered without a member number,
the member number defaults to 1.
1 – 99. If a member number is
entered, the member status
displays.
init
inads
craft
cust
rcus
bcms
browse 1 (one) none
Trunk
Group/Member
Trunk group and group member number. (1-99/1-99).
Port
The port location (cabinet-carrier-slot-circuit) for trunks.
Signaling Group
ID
If the trunk is ISDN, this field contains the number of the ISDN
Signaling Group. Otherwise, this field is blank.
Connected Ports
Port locations (cabinet-carrier-slot-circuit) connected to the trunk.
Service State
In-service/active, in-service/idle, out-of-service, out-of-service-NE
(Near End), out-of-service-FE (Far End), maint-NE/active,
maint-FE/active, maint-NE/idle, maint-FE/idle, pending-in-service,
pending-maint, or disconnected. NE (Near End) and FE (Far End)
refer to the “end” of the trunk that has placed the facility in its current
state.
monitor trunk 78/1
TRUNK STATUS
Trunk Group/Member: 078/001 Service State: in-service/idle
Port: 01C1505 Maintenance Busy? no
Signaling Group ID: CA-TSC State:
Connected Ports: