Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 146 / 1930

Maintenance for CSI systems
555-233-119 146
Issue 5 October 2002
Screen 41 shows the screen output for the display errors command.
Screen 41. Screen output for display errors command
In this example the errors that have
ATM-NTWK
for
Name
and
1
for
Data
indicate an error returned to the TN230X from the ATM network. In this
case,
Type
indicates the Cause Code returned by the ATM network (see
Table 17 on page 146 ). In the example above, two Cause Codes (41 and
3) are reported from the ATM network.
Table 17. Observed Cause Codes
Cause
Code
Definition Observed Cause
3 No route to destination The ATM addresses administered in the ATM switch
(show signaling routes or show signaling esi) or in
the
Avaya MultiVantage Software running on the
Definity Server CSI
(display atm pnc) are incorrect.
31 Normal, unspecified This is a normal return.
41 Temporary failure This "try again later" Cause Code has been observed
when the source of the problem is on another port (for
example, a routing problem on another port that
displays Cause Code 3).
47 Resources unavailable,
unspecified
Avaya Definity Server CSI
call volume is too high for
the available resources in the ATM network.
63 Service or option unavailable,
unspecified Avaya Definity Server CSI call volume is too high for
the available resources in the ATM network.
display errors Page 9 SPE A
HARDWARE ERROR REPORT
Port Mtce Alt Err Aux First Last Err Err Rt/ Al Ac
Name Name Type Data Occur Occur Cnt Rt Hr St
AT01A ATM-NTWK 41 1 11/12/16:59 12/09/15:10 14 0 0 n n
AT01A ATM-NTWK 31 0 11/13/18:27 11/20/20:02 5 0 0 n n
AT02A ATM-NTWK 0 0 11/13/18:45 11/13/18:45 1 0 0 n n
AT02A ATM-NTWK 31 0 11/15/14:40 11/15/14:41 2 120 0 n n
AT01B ATM-NTWK 31 0 11/16/17:39 11/16/17:39 1 0 0 n n
AT01A ATM-NTWK 3 1 11/16/18:19 11/26/13:13 12 0 0 n n