Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 568 / 1930

Maintenance Commands
555-233-119 568
Issue 5 October 2002
test led
Use test led to test all the LEDs in a specified cabinet. Once the cabinet is
validated and the range of circuit packs determined, test led turns on all LEDs on
the circuit packs contained in each carrier until all affected carriers are lit. Once all
the LEDs are on, there is a 2-second pause, and all the LEDs are turned off in the
same order. Once all of the repeat cycles are completed, all affected LEDs are
restored to the current status.
The following LEDs are NOT lighted by the test led command:
■
Power Unit LEDs
■
Yellow (amber) LED on the tape drive
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
test led all
cabinet
number
short
long
repeat
number
All LEDs in all carriers are tested
Cabinet number (each carrier
tested sequentially)
Simplex: short and long option are
identical and turn on and off all leds
in the specified port network.
Short and long option are identical
and turn on and off all leds in the
specified port network.
Number of times each test in the
sequence is repeated (1-100)
Examples:
test led
test led all r 2
test led cabinet 1
test led c 1
test led 1 long
init
inads
craft all; repeat
= 1; test
sequence
= short in a
duplex
system none