Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 686 / 1930

Maintenance Objects
555-233-119
686
Issue 5 October 2002
1006 ABORT The port is out-of-service. The busy station extension command has
been given to this port, or it has been taken out-of-service by the failure of
the NPE Crosstalk Test.
1. Look for error type 18 (port busied out) for this port. If this error is
present, release the port (release station extension), and run the
test again.
2. Check for error type 1537 (NPE Crosstalk Test failed) for this port. If
this error is present, investigate the errors associated with the NPE
Crosstalk Test (#6).
3. Make sure that the terminal is connected and in service, and retest.
2000 ABORT Response to the test request was not received within the allowable time
period.
2100 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals no more than 5 times.
2. If the test continues to abort, escalate the problem.
1 FAIL The switchhook audit failed. This result does not indicate a hardware
problem. The other updates were not performed because of this failure.
This may occur if the audit is performed at the same time the terminal
equipment goes off-hook.
1. Use status station extension to determine when the port is
available.
2. Retry the command at 1-minute intervals no more than 5 times.
3. If the test continues to fail, escalate the problem.
5 FAIL The message waiting lamp update failed. This may be an internal software
error. The translation and ringer updates were not performed because of
this failure.
7 FAIL The translation update failed. There may be an internal software error.
The ringer update was not performed because of this failure.
8 FAIL The ringer update failed. There may be an internal software error.
1. Retry the command at 1-minute intervals no more than 5 times.
2. If the test continues to fail, escalate the problem.
PASS The software and the port processor have the same status. Investigate
user-reported troubles on this port by running other port tests, by
examining station wiring, or by inspecting the station.
Table 53. Test #36 Station Status and Translation Audits and Updates — Continued
Error
Code Test
Result
Description/ Recommendation
Continued on next page