Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 87 / 1930

Troubleshooting Features
Issue 5 October 2002
87
555-233-119
An example of the Trunk Group screen Page 2 is shown in Screen 16 on
page 87 .
Screen 16. Trunk Group screen — Simplex Mode (Page 2 of 5)
4. Locate the Tie Trunk port terminal connections at the cross-connect field.
See Table 7 on page 84 .
5. At the cross-connect field, use the D Impact Tool (AT-8762) to disconnect
outside trunk facilities from the Analog Tie Trunk ports and mark the
disconnected wires for later when the Tie Trunk ports are placed back into
normal operation.
6. Use jumper wires (DT 24M-Y/BL/R/G) and the D Impact Tool to connect
wiring between the two ports assigned in Step 3 at the cross-connect field.
For example, if the two ports on the Analog Tie Trunk circuit pack are ports
1 and 2, connect the wirings as shown below:
7. Repeat Steps 13 through 16 of the E & M Mode Test Procedure.
Page 2 of 5
TRUNK GROUP
GROUP MEMBER ASSIGNMENTS
Port Name Mode Type Answer Delay
1: B1901 simplex type 5
2: B1902 simplex type 5
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
simplex simplex
5 type 5 type
R2 R11
T2 T11
R12 R1
T12 T1
2 Port 1 Port