Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 270 / 1930

Maintenance Commands
555-233-119 270
Issue 5 October 2002
Output
Screen 58. Display Firmware Image(s)
Field descriptions
Board Type
For VAL, this field is TN2501
FW Vintage
The firmware vintage number
HW Signature
The hardware signature number
Suffix
The circuit pack suffix code letter
Date
The date the firmware file was created or transferred to
the circuit pack
Timestamp
The time that the firmware file was created or transferred
to the circuit pack
CRC Checksum
Cyclic Redundancy Check (data integrity algorithm)
Active Image
y indicates the active firmware image file.
n indicates the inactive firmware image file.
To change the active image file, use the set boot-image
command.
Reboot Image
y indicates that this image becomes active after a system
reset.
n indicates that this image becomes inactive after a
system reset.
get boot-image 1C07
DISPLAY FIRMWARE IMAGE(S)
Image 1 Image 2
Board Type: TN2501 TN2501
FW Vintage: 02 02
HW Signature: 02 02
Suffix: A A
Date: 03/02/02 03/02/01
Timestamp: 10:30:50 12:42:18
CRC Checksum: Good Good
Active Image: Yes No
Reboot Image: Yes No