Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 1636 / 1930

Maintenance Objects
1636
Issue 5 October 2002
1005 ABORT This test is not valid for this type of translation. Ports administered as ASAI
or ADJK cannot run this test because the B channels associated with the
port are not used by ASAI or Avaya Adjunct Links. This is a normal
condition.
2000 ABORT Response to the test was not received from the BRI-LINE circuit pack within
the allowable time period.
1. If this result occurs repeatedly, attempt to reset the circuit pack with the
busyout board PCSS and the reset board PCSS commands if the
other ports on the board are not in use.
2. If this result occurs again, replace the circuit pack.
2012 ABORT Internal system error
2100 ABORT Could not allocate the necessary resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2103 ABORT The system could not make the conference connection for the test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1, 2 FAIL The TDM Looparound failed on one of the channels.
■
Error Code 1 — TDM Loop Around Test failed on B1.
■
Error Code 2 — TDM Loop Around Test failed on B2.
7, 8 FAIL The Conference Circuit Test failed on a B-channel.
■
Error Code 7 — test failed on B1
■
Error Code 8 — test failed on B2.
1. If the test fails repeatedly, attempt to reset the circuit pack with the
busyout board PCSS and the reset board PCSS commands if the
other ports on the board are not in use.
2. If the test fails again, replace the circuit pack.
PASS The BRI Port Local TDM Loop Around Test passed.
Table 475. TEST #619 BRI Port Local TDM Loop Around — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page