Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 812 / 1930

Maintenance Objects
555-233-119
812
Issue 5 October 2002
The Deactivated state indicates a problem with the BRI-LINE circuit pack. When
in this state, the Level 1 interface is idle and is not trying to communicate with the
BRI endpoints or adjunct. When an ISDN-BRI port is placed in the out-of-service
state, Level 1 is also put into the Deactivated state. This could be due either to the
system detecting a fault with the port or to a busyout port PCSSpp request.
Table 114. TEST #621 Level 1 Status Inquiry
Error
Code Test
Result Description/ Recommendation
1187 ABORT The board, port or station may have been busied out by a technician.
1. Look in the Error Log for Error Type 18 (port busied out) for this port
and BRI-BD (board busied out). If this error type is present for
BRI-PORT only, release the port with release port pp and run the test
again. If the error is present for both BRI-BD and BRI-PORT, release
the board with release port PCSS and run the test again.
NOTE:
When you release a port, you release all ports associated with it. If
certain ports still need to be busied out, use release port PCSSpp to
busy them out.
2. Make sure the terminal is connected.
3. Retry the command at 1-minute intervals a maximum of 5 times.
2000 ABORT Response to the test was not received from the circuit pack within the
allowable time period.
1. If the test aborts repeatedly a maximum of 5 times, reset the circuit
pack with busyout board PCSS and reset board PCSS.
2. If the test aborts again, replace the circuit pack.
2012 ABORT Internal system error.
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page