Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 394 / 1930

Maintenance Commands
555-233-119 394
Issue 5 October 2002
reset switch-control
Use reset switch-control to reset and initialize the switch control hardware and
firmware.
reset system
Use reset system to reset the system beginning with the corresponding vector bit
set, a core dump is written to memory card, only if the memory card is the special
core dump card), the vector is cleared, and the requested restart is performed.
NOTE:
All successful reset system commands log users off.
Feature Interactions
■
The reset system command invokes system initialization like low-level
maintenance. Software never escalates requested reset levels; technicians
determine the levels.
■
Two hardware switches are associated with active SPEs. These hardware
switches override demand maintenance activities requested by system
technicians.
Action/Object Qualifier Qualifier Description Logins Defaults Feature Interactions
reset switch-control none none init
inads
craft
nms none
Action/Object Qualifier Qualifier Description Logins Defaults Feature Interactions
reset system level 1 = Warm Restart
2 = Cold 2
3 = Cold1
4 = Reboot init
inads
craft none see below