Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 546 / 1930

Maintenance Commands
555-233-119 546
Issue 5 October 2002
Action/
Object
Qualifier Qualifier Description Logins Defaults
Feature
Interactions
test
ds1-loop location Physical location of board (PCSS) init
inads
craft
superuser
other
1
1 Logins with
Maintain Switch Circuit Packs
permissions enabled.
ds1/csu-l
oopback
-tests See below
cpe-loopback-
jack-test-begin Long-duration loopback test setup
through the Customer Premises
Equipment (CPE) Loopback Jack.
Allows user to specify a loop-up
code for the CPE loopback jack if
it differs from the default (0x47F).
The loop-up code is entered by
specifying the number of bits in
the loop-up code as well as the
actual hexadecimal bit-pattern.
2
2 For TN464F or TN767E or later suffix DS1 boards only. The test aborts if the board has not been taken out of
service with the busyout command.
far-csu-loopback-
test-begin Long-duration loopback test setup
through the far-end Channel
Service Unit (CSU)
one-way-span-
test-begin Long-duration one-way span test
end-loopback/
span-test Terminates long-duration
one-way span and loopback
testing
inject-single-bit-
error Single bit error sent within an
active framed 3-in-24 test pattern
used in long-duration loopback
and span testing
ds1/csu-
loopback-tests Sequentially executes the
following loopback tests: DS1
Board LoopBack, CSU Module
Equipment LoopBack, and CSU
Module Repeater LoopBack.
3
3 For TN464F or TN767E or later suffix DS1 boards
Examples:
test ds1-loop 01c08
test ds1-loop 1-3c03
cpe-loopback-jack
test ds1-loop 1-3c03 cpe
test ds1-loop 10c03 end
test ds1-loop 02d12 fa
test ds1-loop 02d12 inj