Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 553 / 1930

test hardware-group
Issue 5 October 2002
553
555-233-119
When test firmware download is executed, the tests vary depending on the
options chosen and types of hardware in the group. Some tests are run
concurrently to speed execution, so test results for several maintenance objects
may be intermixed.
test hardware-group
Use test hardware-group to run a set of hardware diagnostic tests on the whole
system, a carrier, cabinet, spe, or board. The tests vary according to the
configuration of the system and the specified command options. Each test
exercises diagnostics on all the hardware in the specified hardware group and
reports results of the test along with any possible error codes. Concurrent testing
is done to enhance performance, therefore, test results appear on the SAT in the
order they are received. Consequently, test results of one maintenance object
may be intermixed with test results of other maintenance objects.
Because the tests for test hardware-group are not destructive, the tests
performed on a particular maintenance object with either the short or the long
option may not be the same as the corresponding demand tests.
Use the
CANCEL
key or cancel hardware-group on a different SAT to cancel a
hardware-group command executing in the foreground.
Use cancel hardware-group on the same SAT to cancel test hardware-group
running in the background.
Enter resume hardware-group to resume the canceled test hardware-group at
the point it left off. Restarts are not allowed for test hardware-group commands
entered with the all-ports or the spe-interchange options.