Avaya DEFINITY Server CSI, Руководство по обслуживанию, Страница: 1210 / 1930

555-233-119
1210
Issue 5 October 2002
Screen 84. Display Firmware Image(s) screen
■
Check the date and time stamps to determine whether to revert back to
Image 1
or
Image 2
. In the example that follows, we are reverting back to
Image 2, because it has the older date and time stamp.
■
Check the Active Image field to see if Image 1 or Image 2 is active on the
board.
2. At the SAT type set boot-image board <UUCSS> image <1 | 2> and
press
Enter
.
Example: set boot-image board 1C07 image 2
NOTE:
In most cases the image with the more recent date and time stamp is
the new firmware image file.
The system responds with Command Successfully Completed.
3. At the SAT type get boot-image <UUCSS> and press
RETURN
to check the
status of the firmware images on the target circuit pack.
The Display Firmware Image(s) report ( Screen 85 ) appears.
get boot-image 1C07
DISPLAY FIRMWARE IMAGE(S)
Image 1 Image 2
Board Type: TN2501 TN2501
FW Vintage: 02 01
HW Signature: 02 02
Suffix: A A
Date: 03/02/02 03/02/01
Timestamp: 10:30:50 12:42:18
CRC Checksum: Good Good
Active Image: Yes No
Reboot Image: Yes No