Rohde & Schwarz FSV3000, User Manual

Page: 777 / 1489

Network operation and remote control
R&S
®
FSVA3000/ R&S
®
FSV3000
777 User Manual 1178.8520.02 ─ 08
ment the LAN home page belongs to. To identify the instrument, activate the
"Device Indicator". Then check the "LAN Status" indicator of the instruments.
– "LAN Configuration" allows you to configure LAN parameters and to initiate a
ping.
(See
"Ping client" on page 829.)
– "Utilities" provides access to an event log.
●
"Instrument Control"
–
"Web Control" provides remote access to the instrument via VNC (no installa-
tion required). Manual instrument controls are available via the front panel sim-
ulation.
– "File Download" downloads files from the instrument.
– "File Upload" uploads files to the instrument.
(See Chapter 11.7.5, "How to control the R&S FSV/A via the web browser inter-
face" , on page 833.)
●
"License Manager"
–
"License Manager" allows you to install or uninstall license keys and to acti-
vate, register or unregister licenses.
●
"Help"
"www.rohde-schwarz.com" opens the Rohde
& Schwarz home page.
11.2 Status reporting system
The status reporting system stores all information on the current operating state of the
instrument, and on errors which have occurred. This information is stored in the status
registers and in the error queue. Both can be queried via GPIB bus or LAN interface
using the
STATus
... commands.
(See Chapter 12.11, "Using the status register" , on page 1369).
For details on the status reporting system, see Remote control via SCPI .
● Hierarchy of status registers ................................................................................. 777
● Contents of the status registers ............................................................................ 778
● Reset values of the status reporting system ......................................................... 789
11.2.1 Hierarchy of status registers
As shown in the following figure, the status information is of hierarchical structure.
Status reporting system