Rohde & Schwarz FSV3000, User Manual

Page: 910 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
910 User Manual 1178.8520.02 ─ 08
Example: SENS:POW:ACH:GCH:GAP2:MAN:UPP BC, ON
Enables the second upper gap channel in the gap between sub
blocks B and C.
Example: See "Example: configuring and performing an asymmetrical
MSR ACLR measurement" on page 920
Manual operation: See "Gap Channel Active" on page 196
[SENSe:]POWer:ACHannel:SPACing:GAP<gap>:MANual:LOWer <SBGaps>,
<Spacing>
[SENSe:]POWer:ACHannel:SPACing:GAP<gap>:MANual:LOWer? <SBGaps>
This command defines the distance from sub block to the specified lower gap channel.
The required spacing can be determined according to the following formula:
Spacing = [CF of the gap channel] - [left sub block center] + ([RF bandwidth of left sub
block] /2)
Suffix:
<gap>
.
1 | 2
Gap channel number
Parameters:
<Spacing> Default unit: HZ
Parameters for setting and query:
<SBGaps> AB | BC | CD | DE | EF | FG | GH
Name of the gap, defined by the letters of the surrounding sub
blocks (e.g. "AB" for the gap between sub blocks A and B).
Example: POW:ACH:SPAC:GAP:MAN:LOW AB, 5MHz
Example: See "Example: configuring and performing an asymmetrical
MSR ACLR measurement" on page 920
Manual operation: See "Gap Channel Spacing" on page 196
[SENSe:]POWer:ACHannel:SPACing:GAP<gap>:MANual:UPPer <SBGaps>,
<Spacing>
[SENSe:]POWer:ACHannel:SPACing:GAP<gap>:MANual:UPPer? <SBGaps>
This command defines the distance from the sub block to the specified upper gap
channel.
The required spacing can be determined according to the following formula:
Spacing = [right sub block CF] - [CF of gap channel] - ([RF band-
width of right sub block] /2)
Suffix:
<gap>
.
1 | 2
irrelevant
Configuring and performing measurements