Rohde & Schwarz FSV3000, User Manual

Page: 1067 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1067 User Manual 1178.8520.02 ─ 08
Before this command can be performed, the conversion loss table must be selected
(see
[SENSe:]CORRection:CVL:SELect
on page 1067).
This command is only available with option B21 (External Mixer) installed.
Parameters:
<Type> string
Name of mixer with a maximum of 16 characters
Example: CORR:CVL:SEL 'LOSS_TAB_4'
Selects the conversion loss table.
CORR:CVL:MIX 'FS_Z60'
Manual operation: See "Mixer Name" on page 417
[SENSe:]CORRection:CVL:PORTs <PortType>
This command defines the mixer type in the conversion loss table. This setting is
checked against the current mixer setting before the table can be assigned to the
range.
Before this command can be performed, the conversion loss table must be selected
(see
[SENSe:]CORRection:CVL:SELect
on page 1067).
This command is only available with option B21 (External Mixer) installed.
Parameters:
<PortType> 2 | 3
*RST:
2
Example: CORR:CVL:SEL 'LOSS_TAB_4'
Selects the conversion loss table.
CORR:CVL:PORT 3
Manual operation: See "Mixer Type" on page 417
[SENSe:]CORRection:CVL:SELect <FileName>
This command selects the conversion loss table with the specified file name. If
<file_name> is not available, a new conversion loss table is created.
This command is only available with option B21 (External Mixer) installed.
Parameters:
<FileName> String containing the path and name of the file.
Example: CORR:CVL:SEL 'LOSS_TAB_4'
Manual operation: See "New Table" on page 414
See "Edit Table" on page 414
See "File Name" on page 416
Setting basic measurement parameters