Rohde & Schwarz FSV3000, User Manual

Page: 435 / 1489

Common measurement settings
R&S
®
FSVA3000/ R&S
®
FSV3000
435 User Manual 1178.8520.02 ─ 08
Network configuration
Access : "Overview" > "Input" > "Input Source Config" > "Input Source" > "External
Frontend" > "Network Config"
After connection, you can assign a static IP address or switch to a dynamic IP address
for the external frontend directly from the R&S
FSV/A.
IP Address ...................................................................................................................435
Subnet Mask ............................................................................................................... 435
DHCP .......................................................................................................................... 435
Apply Network Settings ............................................................................................... 436
IP Address
Defines the IP address of the external frontend. If the DHCP server is used ("DHCP
On"), the setting is read-only.
Remote command:
[SENSe:]EFRontend<fe>:NETWork
on page 1045
Subnet Mask
Defines the subnet mask of the external frontend. If the DHCP server is used ("DHCP
On"), this setting is read-only.
Remote command:
[SENSe:]EFRontend<fe>:NETWork
on page 1045
DHCP
Switches between DHCP server available (""On) or not available ("Off"). If a DHCP
server is available in the network, the IP address and subnet mask of the external fron-
tend are obtained automatically from the DHCP server.
Data input and output