manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 838

Network operation and remote control

R&S

®

FSVA3000/ R&S

®

FSV3000

838

User Manual 1178.8520.02 ─ 08

The dialog box is expanded to display the configuration data.

4. Open the "Experience" tab.

The settings on this tab are used to select and optimize the connection speed.

5. In the list, select the appropriate connection (for example: LAN (10 Mbps or

higher)).
Depending on your selection (and how powerful the connection is), the options are
activated or deactivated.

6. To improve the performance, you can deactivate the "Desktop background", "Show

contents of window while dragging" and "Menu and window animation" options.

7. Open the "Local Resources" tab for enabling printers, local drives and serial inter-

faces.

8. If you will need to access drives of the controller from the R&S

 

FSV/A (e.g. in order

to store settings or to copy files from the controller to the R&S

 

FSV/A), select

"More", then enable the "Drives" option.

How to set up a network and remote control

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands